UNX6040E X-ray Baggage Scanner from Unicomp

Model:  UNX6040E

General Specifications

Dimensions : 1260mm(L)*910mm(W)*1240mm(H)

Tunnel Size: 600mm*400mm

Weight : 390kg

Conveyor Height : 610±10mm

Inspection Speed : 0.22m/s

Max. Load Weight: 100kg

Wire Resolution: 40AWG(Typical) 34AWG(Standard)

Steel Penetration: 36mm (Typical) 34mm (Standard)

Radiation Safety: Meets film safety ISO1600

X-ray Dose Rate: < 0.42 μGy/H (5cm away from the housing)

X-ray Generator

Anode Voltage:  140KV-160KV(Adjustable)

Cooling Cycle:     Sealed oil bath with forced air/100%

Single Inspection Dose: < 1.2 μGy

Imaging System

X-ray Detector: Photodiode

Gray Level : 4096

Monitor: 17”

Operating Environment

Storage Temperature:  -5~50 degree

Operating Temperature:  0~40 degree

Relative Humidity:  10% ~ 90% non-condensing

System Power:  220 VAC (±5%)  50Hz/60Hz

Standard Functions:

Image Playback: 50 PCS Inspected Images Could be Replayed

Storage Capacity : No less than 100,000.00 PCS Images.

Tips for Saving Time During Security Checking Before Boarding

Unicomp manufacture and offer security X-ray scanners to airport for years. We noticed that many passengers are complaining about the progress of airport security which waste too much time. According to our experience, it is better to avoid five types clothes.

　　Five types clothes as below:

1)       Full-length Dress

Full-length Dress attracts security person’s attention. If you wear full-length dress, the airport security person will check it carefully for it looks like there could be so many items under the dress.

2)       Metal Hair Clips

The metal hair clips will affect the handheld metal detector and security people will spend more time and pay more attention to you, so lengthen the inspection time. We recommend you take off the clips first and when checking finished, wear it again.

3)       Multi-pocket Pants

Multi-pocket pants are fashion and chic, but it is not good choice for security checking. The airport security staff will check every pocket and keep patting your pockets. There are some people who often forget taking the lighter or key out because there are too many pockets.

4)       Metal Bracelets and Necklaces

Wearing bracelets and necklaces is not safe when you travel around. Larger size necklaces or bracelets are easy to trigger metal detectors and extend the security time.

5)       Shoes which difficult to take off

Passengers must take off the shoes to accept security checking at some airport. High boots or lace-up hiking shoes are not the good choice during checking. It will length the checking time.

Hope those tips could help us save more time! Unicomp will always focus on X-ray technology equipment and create solutions for a safer and healthier world. Our website is www.securityxray.cn  If you have any question or requirement about X-ray baggage scanner, handheld metal detector, walk through metal detect door, feel free to call me : + 86 185 7642 8663  or send email to : zhangke@unicomp.cn

Unicomp Technology Introduction X ray scanner machine

Unicomp Advanced X-Ray Technology Shinning in the Productronica China Fair

From March 14th 2017 to March 16th , Productronica China successfully held on Pudong international convention center, Shanghai Province. This session Productronica China is held together with electronic China .This the area of this exhibition is over 67000 square meters , and have more than 1200 professional exhibitor . There are hundreds and thousands professional person on the exhibition . As for the leader in the intelligent X-ray detection equipment of China , our company have already attended this SMT & Semiconductor session distinguished gathering for 8 years .

Unicomp Technology showed 5 series of X-Ray device . According to the clients requirement , introduced X-Ray industry most popular on-line X-Ray LX2000 , big size and highly precision X-ray AX9100 , first show AX8300 X-ray , sell well AX8200 , economic desktop type X-Ray CX3000 , original American import True 3D SPI AP500 . Some of the devices it is the first show on the exhibition . The clear image detection, excellent progress, flexible operating software and precise navigation positioning and multi-axis linkage, attracted a lot of professional personnel to stop and consult . So many domestic and foreign customers test their samples , and intend to make a order .  

This exhibition increase that Unicomp technology communicate with China and even the users and professional personnel around the world deeply . Unicomp technology rapid develop especially in the field of electronics and semiconductor manufacturing , so that the whole "Made in China" are shining in the international stage . Unicomp Technology is willing to accompany with you, together into a brand new future .

Unicomp X-ray Technology Shining National Security and Explosive Device Disposal Seminar

The national security and high-tech seminar and the 18th International Police Fire Technology and Equipment Development Forum was successfully held in China Public Security University police station on 9th March 17, 2017. The seminar was organized by the Chinese Public Safety Equipment Net. Unicomp is also invited delivered a keynote speech, boarded the highest institution of Chinese public security system, People's Public Security University of China.

In addition, the seminar also invited the Beijing Customs, Beijing Municipal Public Security Bureau Patrol Corps security detachment, the National Railway Public Security Bureau, the Ministry of Public Security Anti-terrorism Bureau, the Ministry of Public Security First Institute, the Ministry of Public Security Document Identification Center, the Ministry of Public Security , The National Security and Inspection Center (Beijing), the Armed Police Academy, the Armed SWAT Police Academy, the Armed Police Headquarters, the China Poly Group Corporation, the China Ordnance Industry Group Corporation, the China Police Academy equipment branch, and other important national units from security and explosive device disposal area.

As the co-organizer of this seminar, Unicomp Technology also make a speech about the research and development of X-ray technology and equipment, and products used in the field of counter-terrorism and security and explosive device disposal area.
Unicomp Technology is national high-tech enterprises which engaged in researching, developing and manufacturing X-ray technology research and X-ray intelligent detection equipment. Unicomp is the domestic X-ray intelligent detection system integrators. This project fills gaps of the domestic technical. The technology and equipment are widely used in public safety, police anti-terrorism, electronic manufacturing (EMS), integrated circuits, semiconductors, lithium batteries, solar photovoltaic, LED, connectors, auto parts, tires wheels, pressure vessels and other high-tech industries.

The seminar was crowded with a strong academic atmosphere. Unicomp Technology has the honor to participate in such a high standard, high professional academic society, we will create more advanced security products, solutions and services to contribute to the community, so that the country more secure! Make the world safer! For more information, please visit our website : www.securityxray.cn or call the 24-hour hotline 400-880-1456

2017 Canton Fair Invitation from Unicomp

Unicomp, the leading x-ray inspection technology company will join the 121th session Canton Fair during 15^th -19^th April  at E21 , Hall 11.3 in China Import and Export Fair Complex with X-ray Scanner UNX5030E, Electronics X-ray CX3000, NDT X-ray UNC160. The UNX5030E of UNX series is economic X-ray baggage scanner which is good choice for security in subway station, metro, exhibition hall, churches, sports centers with tunnel size 500mm*300mm. X-ray Detection equipment CX3000  is high technology machine which used to inspect and analyze soldering joint and materials inner structure. For the NDT X-ray UNC160, It could check inner structure of cast parts, pressure vessels wheel, tires and metal parts, steel pipe, cylinder and wood with strong penetration, high reliable, low breakdown rate, long lifespan.

China Import and Export Fair, also known as the Canton Fair, is held biannually in Guangzhou every spring and autumn, with a history of 55 years since 1957. The Fair is a comprehensive one with the longest history, the highest level, the largest scale, the most complete exhibit variety, the broadest distribution of overseas buyers and the greatest business turnover in China.

The Canton Fair International Pavilion is regarded by overseas companies as their “#1 choice in China” for exploring not only the Chinese market, but also the global market. The numbers make it easy to see why. The 120th session attracted more than 600 leading companies from over 40 countries and regions. In total, there were delegations from 14 countries presenting at nearly 1,000 booths, which filled an exhibition area of 20,000 Square meters.

We sincerely invite you to visit our booth at E21 Hall 11.3 and our factory located in Shenzhen, for it only takes one hour from Canton Fair to our factory by High Speed Railway. For more information, please feel free to visit our website: www.unicomp.cn and send email to : zhangke@unicomp.cn

UNICOMP X-ray Baggage Scanner UNX100100A

The UNX100100A is an easy to operate scanner that provides operators with extremely detailed, more revealing images, enhanced detection capabilities and a very low cost of ownership.

With a tunnel opening of 100cm x 100cm,  Big and oversize parcels and bags can be screened easily and effectively. The UNX100100A is the ideal solution for critical infrastructures, transportation and border security.

Inspection speed is 0.22m/s in general and customer could choose 0.4m/s or 0.67m/s. Steel Penetration is 43mm and X-ray generator voltage is adjustable from 140Kv to 160Kv.

We are searching internet cloud platform for remote technical support and data analysis.  

For more information, contact CoCo by phone : +86 18576428663 or email: zhangke@unicomp.cn

                                      Unicomp X-ray Technology Group

Unicomp Technology Group (Stock code: 834204) established in 2002. It is a high-tech enterprise which involved in the R&D and manufacturing of X-ray detection equipments. Unicomp has become the leading enterprise in X-ray industry in China. This technology is widely applied in inspection around public security, lithium battery, EMS, IC, semiconductor, solar photovoltaic, LED, connector, automotive Parts, wheel, tires, pressure vessel industry etc.

Today, Unicomp Technology Group has three R&D and manufacturing sites exceeding 25,000 square meters which respectively located at Wuxi, Jiangsu Province, Shenzhen, Guangdong Province, and Chongqing. We also penetrated into the international market with sales and after sales service support in USA, Mexico, Europe, UK, Russia, Brazil, Ecuador, Australia , Middle East and Southeast Asia. The international connection help Unicomp to be recognized as a Global Force in X-ray industry. Now Unicomp is a famous brand in the industry both at home and abroad.

Our production:

X-ray baggage Scanners System        

X-ray Detection Equipment for Lithium Battery

X-ray Detection equipment for Electronics  

Industrial NDT X-ray Equipment

3D CT X-ray Equipment              

SMT/PCB Cleaning Equipment